Contour on luultavasti Dynaudion tunnetuin kaiutinmallisto. Malliston uusimmassa sukupolvessa yhdistyvät Evidence- ja Confidence Platinum-mallistojen teknologiat. Erittäin jäykässä kotelossa on erikoisvalmisteinen etulevy, joka on valmistettu alumiinista. Tämä rakenne eliminoi tehokkaasti kaikki häiriöresonanssit, joten äänentoisto on puhdasta erittäin suurillakin äänenvoimakkuuksilla.

Contour 60i

If you have a bigger listening room – or if you just like to play it loud – the Contour 60i, with its unique midrange driver, is your new best friend.

Contour 60i sounds bigger than you’d think. Yes, we mean that…

And it isn’t just because it’s a grown-up, full-size, three-way floorstander. Of course it’s capable of outright, neighbour-infuriating volume. It sounds big in other ways too – from the soaring soundstage of a top orchestral recording to the caffeinated surround-sound effects in a movie, Contour 60i simply fills the room – without resorting to bass-heavy bombast along the way.

Starting at the top

You’ll find the jewel in the crown: the Esotar 2i tweeter.

We looked at the older Esotar 2 from the 2016 Contour, took it apart and realised we could give it a boost with some tech from our flagship Confidence range (the Hexis) and also our flagship Core professional reference monitor series (the larger rear chamber). Together these clever mods help to reduce unwanted resonances and smooth out the frequency response for even clearer treble performance.

Contour 60i is the only model in the family to have a dedicated midrange driver. It uses an aluminium voice-coil, and also has a neodymium magnet system – all developed and optimised at the Dynaudio Labs in Denmark. It is, in fact, exactly the same midrange driver we used in the 2016 Contour 60. If it ain’t broke…

Where the difference lies is in how it’s mounted

We’ve used more tech from Core here, isolating it in a precision-moulded cup containing resonance-defeating ribs. If there’s one thing you can never have too much of, it’s midrange clarity – and Contour 60i now has even more.

The two woofers are updated. Each has a bigger magnet system, a different voice-coil design and a glass-fibres voice-coil former, as first used in the Confidence range and Sub 6 subwoofer. That means even tighter bass, at higher volume. We’ve chosen copper for these ones over aluminium. Why? Because they’re dedicated bass drivers. Copper is heavier and provides more moving mass. More moving mass lets us dig deeper without impinging on the midrange, handled by the super-sprightly driver just above.

The crossover has been updated, too. You can’t change all the drivers without taking a look at the speaker’s ‘brain’, after all. Plus, the effect of that moulded midrange cup and the aramid fibre woofer spiders let our engineers shift the crossover frequency up. It now works better at slightly higher frequencies (up to around 300Hz). The frequency curve in this area is also flatter, meaning better midrange performance from a simpler design.

The multi-layer curved cabinet and sleek-but-solid aluminium baffle provide your music (which was likely mixed using Dynaudio studio speakers, too) with a robust, defined acoustic foundation. So much so that, if we’ve done our jobs right, you’ll forget they’re even there and just … listen.

Tekniset tiedot:

Herkkyys: 88 dB
Tehonkesto (jatkuva): 390 W
Impedanssi: 4 Ohm
Taajuusvaste: 28 Hz – 23 kHz (±3dB)
Basson toimintaperiaate: refleksi
Jakotaajuudet: 220/4500 Hz (3-tie)
Diskantti: 28 mm pehmyt kalotti (Esotar2i)
Keskiääni: 150 mm (MSP)
Basso: 2 x 240 mm (MSP)
Mitat (l/k/s): 255 x 1330 x 420 mm
Paino: 54,3 kg

Nimi
Sähköposti
Puhelin
Enquiry

Dynaudio Contour 60i

PMC SE-sarja, MB2 XBD SE

PMC SE-sarja, MB2 SE

PMC SE-sarja, IB2 SE

Harbeth Compact 7ES-3 XD

MR Hifi – Helsinki

MR Hifi – Lahti

Päivitetään…